MAKITA 2 PIECE COMBO HAMMER DRILL / IMPACT DRIVER KIT DLX2176T (DLTD)
Makita DLX2176T 5.0Ah Li-Ion Brushless Cordless 2pce Combo Kit
MAKITA DHP481Z 18V LI-ION CORDLESS BRUSHLESS HAMMER DRIVER DRILL - SKIN ONLY - DHP481Z
Features:
- Single sleeve keyless chuck
- Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications
- Mode ring selection
- Mechanical 2 speed gearing
- Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
- All metal gear construction
- Twin LED job light with after-glow function
- Battery fuel gauge shows power remaining in battery
- Single sleeve keyless chuck allows for easy bit installation removal by one hand
- High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
- Extreme Protection Technology with enhanced dust and drip resistant performance
Specifications:
- Voltage: 18V
- Impacts Per Minute
- Hi: 0 - 31,000ipm
- Lo: 0 - 8,250ipm
- Max Fastening Torque:
- Hard: 115Nm
- Soft: 60Nm
- No Load Speed:
- Hi: 0 - 2,100rpm
- Lo: 0 - 550rpm
- Capacity:
- Masonry: 16mm
- Steel: 13mm
- Wood: 76mm
- Dimensions (L x W x H): 205mm x 79mm x 249mm
- Weight: 2kg
MAKITA DTD154Z 18V 4-Mode LI-ION CORDLESS BRUSHLESS IMPACT DRIVER - SKIN ONLY - DTD154Z
Features:
- Aluminium hammer case
- One-touch bit installation, no need to pull bit sleeve for bit installation
- Twin LED job light with pre-glow and afterglow functions
- High rotation speed at 3600rpm
- Variable speed controlled by trigger
- Ergonomically designed handle with soft grip provides comfortable grip and more control while minimising hand fatigue and pain
- Electronic 3-stage impact power selection - in order to reduce fault tightening, hard/medium/soft impact power can be selected to the material of workpiece or screw type simply by pushing a button
- T-Mode is a special mode optimum for fast tightening of self drilling screws without damaging the screw and workpiece
Specifications:
- Voltage: 18V
- Capacity:
- Machine screw: M4 - M8
- Standard bolt: M5 - M16
- High strength bolt: M5 - M14
- Coarse thread (length): 22mm - 125mm
- Impacts per minute:
- Speed 1: 0 - 3800ipm
- Speed 2: 0 - 2600ipm
- Speed 3: 0 - 1100ipm
- No load speed:
- Speed 1: 0 - 3600rpm
- Speed 2: 0 - 2100rpm
- Speed 3: 0 - 1100rpm
- Max fastening torque: 175Nm
- Vibration level: 12.5m/s²
- Sound pressure level: 96dB(A)
- Sound power level: 107dB(A)
- Dimensions (L x W x H): 117mm x 79mm x 236mm
- Weight: 1.2kg
Warranty:
- 3 Years Warranty Covered By Makita Australia
MAKITA BL1850B-L 18V 5.0AH LI-ION CORDLESS BATTERY WITH GAUGE 2-PACK - BL1850B-L
Features:
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Up to 66% more run time per charge compared to BL1830
- Fast 45 minute charging time
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
- Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
- The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
- If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
- Voltage: 18V
- Amp hour: 5.0Ah
- Cell type: Lithium-Ion
- Charging time: 45 minutes
- Weight: 0.6kg
MAKITA DC18RC 18V LI-ION CORDLESS BATTERY FAST CHARGER - DC18RC
Features:
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
Specifications:
- Voltage: 18V
- Cell capacity: 1.5Ah - 6.0Ah
- Charge Time:
- 1.5Ah: 15mins
- 3.0Ah: 22mins
- 4.0Ah: 36mins
- 5.0Ah: 45mins
- 6.0Ah: 55mins
- Length: 185mm
- Weight: 0.82kg
Warranty:
- 2 Years Warranty Covered By Makita Australia
MAKITA 18V BRUSHLESS COMPACT TWIN CASE
Important note: This twin case will only suit DHP480 / DHP481 and the DTD series
Features:
- Heavy Duty polyethylene constructed carrying case
- Can fit 2 x Tool, 2 x Batteries, 1 x Charger
Click here to view the full Shipping Details and Returns Policy.